The Basics of Welding Safety (3 Part Series)

SafetyGuy08 from safetycommunity.com posted a great 3 part series on Welding Safety. The links to the 3 articles are below but first here is a little excerpt that talks about the important of FRC Safety clothing:

Certain precautions therefore have to be taken in order to avoid burns. Bare skin is, of course, not recommended. Flame retardant and fire resistant clothing is necessary. In addition, a certain number of other issues have to be taken into consideration:

  • No pockets – With flying super heated debris flying around, pockets are a hazard. Hot pieces can land inside a pocket and burn without being able to fall away.
  • Buttoned up collars – Keeping flying debris out of the neck line is essential
  • Shirts outside of the pants – Tucking the shirts inside the pants creates the same type of issue that pockets do. Shirts outside of the pants allow the hot particles to fall away rather than simmering.
  • Pants without cuffs – Cuffs end up essentially being the same thing as pockets.
  • Flammable and combustible material needs to be far from the welding area. Sparks and debris can be projected up to 35 feet or more.
  • The rules above about clothing apply to co-workers and others who might be in the immediate vicinity
  • Know the location of the fire extinguishers before you start working. Once a fire is blazing, it’s too late to go looking for it. Be prepared.

Heat issues

When dealing with temperatures that can reach 10,000 degrees, and complete skin coverage, especially with FR clothing, we are automatically talking about the possibility of heat stress. Understand the symptoms and treatment of heat related health issues and take the appropriate measures. Make sure that you take frequent breaks away from the heat and stay hydrated at all times.

You can read all three post at the following links…

http://www.safetycommunity.com/profiles/blogs/the-basics-of-welding-safety

http://www.safetycommunity.com/profiles/blogs/the-basics-of-welding-safety-1

http://www.safetycommunity.com/profiles/blogs/the-basics-of-welding-safety-2

Master Brands to Exhibit at Wyoming Safety Summit

One of our fine sales reps Rusty Telford will be exhibiting at the Wyoming Safety Summit on June 15th and 16th in Rock Springs, Wyoming at Western Wyoming Community College (2500 College Drive, Rock Springs, WY 82901). He will be available to answer questions.

Derek Sang from Westex, maker of Indura and Indura ultra soft fabric will be presenting at 1:30PM.

Below is the schedule of events for this event:

More on the Rocky Mountain Health, Safety and Environmental Council:

The Rocky Mountain Health, Safety and Environmental Council (RMHSE) is committed to providing a venue for producers, contractors, vendors, and communities to share and communicate best HSE practices, policies, and common challenges. The council will create a proactive atmosphere among participants to raise awareness, encourage consistency and offer education to all through interaction, sharing, and networking.

If you can not attend this conference in person, feel free to send any questions that you might have to Contact Us, and we will get back to you in a timely manner.

Workplace Fire Safety Video

In this OSHA Safety Video it describes the following five things:

  • How Fire Works
  • Preventing Fires
  • Classes of Fires
  • Preparing for a Fire Emergency
  • The Proper Procedure to Follow During a Fire Emergency

Of course here at Master Brands we hope that your company never experiences a fire, but it’s best to be safe in case one occures, and we offer a full line of products to achieve that end.


Tough Tech Flame Resistant. 6.5 oz. Indura. 88% Cotton 12% HT Nylon. Protection: ATPV 12.4 Calories/CM2


Carhartt Flame Resistant 8.5 oz.. Canvas. 88% Cotton 12% HT Nylon. Protection: ATPV 12.1 Calories/CM2


Fabric: Outer 13-ounce. Flame Resistant Duck. 100% Cotton – Flame Resistant 10.5 oz. Quilt Lining. Modacrylic

Here at Master Industrial

We are the only manufactures of FR apparel in the western United States.

Our retail trailer offers:

  • Delivery direct to your job site.
  • Schedule your own run date.
  • Fully stocked with only the best in FR:
  • FR Tough Tech carhartt Bulwark Protective Apparel Walls Clothing
  • Save time by trying on items before you buy.
  • We also welcome phone, fax and e-mail ordering. We’ll even set up your own custom ordering web site.